** SPECIAL OFFER **
Get a rebate on every Talkswitch purchase you make from now until the end of July!
Call us for more details!
The Talkswitch TS-9133i is an IP phone used with Talkswitch systems with a network port running at least software version 5.0. The phone is auto provisioned by Talkswitch. The caller ID memory is 200 calls, and, it has a 200 entry phone directory. It is powered by a power adapter or via PoE. Please note that while Aastra sells the 9133i, it is not even close to the same phone, only the shell in the same. The Talkswitch TS-9133i phone has Talkswitch firmware in it which provides more functions and allows it to work with Talkswitch. With a VOIP-enabled TalkSwitch system and broadband internet access, it can also be used as an external IP extension. Plug the phone in anywhere and it can function just like your extensions in the office. It's the perfect solution for teleworkers who split their time between the office and their home office.
Features of the TalkSwitch TS-9133i include:
Auto discovery of TalkSwitch PBX
10 Pre-programmed feature keys
7 Programmable hardkeys
Full duplex speakerphone
Dedicated RJ22 headset jack
The Talkswitch TS-9133i has a backlit display, 3 lines x 16 characters
Adjustable display contrast
Message waiting lamp and counter
Up to 7 Line/Extension/Queue appearances
Call waiting
Missed call indicator
200 Directory entries
200 Caller ID log entries
100 Redial last numbers
Distinctive ring support
Intercom over speaker
Do not disturb
Voicemail access key
Call park/unpark keys
Overhead paging access
Call pickup — specific/any
Unpark list with pickup
Queue list with pickup
Power over Ethernet (802.3af)
AC wall adapter (included)
The Talkswitch TS-9133i has (2) 10/100 Mbps switched Ethernet ports
802.1p/q VLAN tagging and QoS
NAT traversal support
DHCP
SNTP
SIP (RFC 3261)
G.711 u-law/a-law, G.729b codecs
Multilingual support |
